P16 Output 15 = DirOut Ch 15 (Tap: Post Fader or PreFdr).P16 Output 14 = DirOut Ch 14 (Tap: Post Fader or PreFdr).P16 Output 13 = DirOut Ch 13 (Tap: Post Fader or PreFdr).P16 Output 12 = DirOut Ch 12 (Tap: Post Fader or PreFdr).P16 Output 11 = DirOut Ch 11 (Tap: Post Fader or PreFdr).P16 Output 10 = DirOut Ch 10 (Tap: Post Fader or PreFdr).P16 Output 09 = DirOut Ch 09 (Tap: Post Fader or PreFdr).P16 Output 08 = DirOut Ch 08 (Tap: Post Fader or PreFdr).P16 Output 07 = DirOut Ch 07 (Tap: Post Fader or PreFdr).P16 Output 06 = DirOut Ch 06 (Tap: Post Fader or PreFdr).P16 Output 05 = DirOut Ch 05 (Tap: Post Fader or PreFdr).P16 Output 04 = DirOut Ch 04 (Tap: Post Fader or PreFdr).P16 Output 03 = DirOut Ch 03 (Tap: Post Fader or PreFdr).P16 Output 02 = DirOut Ch 02 (Tap: Post Fader or PreFdr).P16 Output 01 = DirOut Ch 01 (Tap: Post Fader or PreFdr).Next move onto ‘P16 Output 02’, finish all of them as follows Once here, select ‘P16 Output 01’ and set this up to be a Direct Output of Channel 01 with a Post Fader signal tap. The first thing we are going to do is press ‘Routing’ then tab over to ‘P16 Out’. These are a lot of options, but the ‘P-16 Out 1-16’ and the ‘XLR Out 1-16’ are going to be the most fundamental routing locations for our purpose. The X-UF and X-USB expansion card can be fed signal from a bunch of different taps. When we want to do something like this, the X32 does not natively allow this, however, we can do some creative routing to make it work! Behringer X32 Recording with Effects What about Effects or a Post Fader Recording?!įor those using the Behringer X32 as a recording studio interface, some may want to have a post fader recording tap so that they can closely control the recording level to the DAW or even record a ‘processed’ signal with the EQ, Gate, and Dynamics of the X32. The signal from the X-UF and X-USB will play right back after the preamp, but before any of the Low Cut, Polarity Reverse, EQ, Gate, Dynamics, etc. This is perfect when using the recordings as a ‘virtual sound check’ where we can play the recorded tracks out of the DAW and inject the signal back into the X32 so that one can mix without any live band on stage. The X32 taps the signal for the X-UF and X-USB right after the preamp, so any of the Low Cut, Polarity Reverse, EQ, Gate, Dynamics, etc. Make sure to check out my YouTube video “Behringer X32 Recording with Effects!”
These cards allow the X32 to record up to 32 channels at the same time into a computer! The X-UF card has both Firewire and USB 2.0, where the X-USB has only USB 2.0 but both cards are able to pass 32 channels In and 32 channels Out of a digital audio workstation (DAW) on a computer. Enable recording with the red button on each track.With all of the things that the Behringer X32 does, one of my favorite features is the X-UF and X-USB expansion cards. Now, on the track that you are recording to (either in the mixer view or on the left of the tracks view, click on the I/O or input meter and make sure the right input is selected). Enable inputs, and make sure you enable enough (first, last). Select Asio as you audio system and the Behringer X-USB as the driver. On the Reaper side of things, go into Preferences under Options in the menu and look at the Device tab. When you say playing into inputs 7&8, does that mean physically connected there or routed from aux inputs? It is the physical input that counts for the direct routing to the recording interface, so make sure wherever you are connected is routed to the interface in the Routing-card out tab on the X32.Īlso, make sure that the card configuration is set to the number of channels you will be using (setup-card) and route to those channels (ie if set to 8+8, routing to 9&10 is obviously futile). Re: Need step-by-step help recording from x32 rack with either reaper or traditionĪ couple of things you need to make sure of.
0 kommentar(er)
